欧美肥妇多毛BBW,高清白胖肥妇BBWBBW,荷兰肥妇BBWBBWBBW

<table id="6aoaq"></table>
  • <wbr id="6aoaq"><legend id="6aoaq"></legend></wbr>
  • <source id="6aoaq"></source>
    <nav id="6aoaq"><option id="6aoaq"></option></nav>
  • <nav id="6aoaq"><table id="6aoaq"></table></nav>
  • <strong id="6aoaq"><wbr id="6aoaq"></wbr></strong>

    VMC 110/111

    7" Mobile Data Terminal with ARM? Cortex?-A9 platform
    • 主要特點
    • 7" 1024 x 600 TFT LCD monitor with resistor touch screen
    • ARM? Cortex?-A9 Dual Core Processor with 1GHz frequency
    • Compact and fanless design
    • On screen F1 ~ F5 programmable function keys
    • Linux and Android operating system
    • GPS/Wi-Fi/3G/LTE supported (Dead Reckoning included)
    • iButton & RFID for ID identification
    • Dual CAN Bus 2.0B
    • OBDII (ISO15765-4)/SAE J1939 protocol
    • Wide Range DC input from 9 ~ 36V
    • SW Utility for function demonstration on Android platform
    • CE/FCC/Emark
    加入查詢
    產品型錄(PDF)
    LCD Panel 7-inch TFT LCD Panel with LED Backlight 1024 x 600 pixels Brightness: 500 cd/m2 (typical) Contrast ratio: 800:1 (typical) Viewing angle: 150(H), 145(V)
    Touch Screen 4-wire resistant touch Anti-glare coating surface Transmission rate: 80% ± 3%
    CPU & Chipset ARM? Cortex?-A9 Processor with 1GHz frequency Freescale Dual Core
    Memory Onboard DDR3L 2GB
    Storage 1 x Micro SDHC Slot EMMC: 8G on board
    Expansion 1 x Half-size mini-PCIe (PCIe + USB) for WLAN 1 x Full-size mini-PCIe (USB + UART) for WWAN OBDII: ISO15765-4 & SAE J1939 (Default: None, BOM optional) RFID (optional)
    I/O Interface-Front F1 ~ F5 programmable function keys Light Sensor Internal Mic-in 2 x Built-in 2W speakers 3 x LED indicators (Power, Storage and WWAN)
    I/O Interface-Lateral Right side
    - 1 x SIM card slot
    - 1 x Micro SD card slot
    - 1 x USB 2.0 type A
    - 1 x micro USB OTG for maintenance
    Left side
    - 1 x Power button
    - 1 x Volume up/down
    - 1 x Brightness up/down
    - 1 x System reset button
    I/O Interface-Rear/Bottom 1 x lockable power input with ignition 1 x RJ45 for LAN 2 x USB 2.0 Type A
    - DB-15 connector
    - Full RS-232
    - RS-232/485
    - CAN1 2.0B
    DB-15 connector
    - GPI x 3
    Sink type: 5VDC TTL (default)
    Source type: 3 ~ 28VDC
    - GPO x 3
    Sink type: 5VDC TTL (default), max current: 20mA
    Source type: 3 ~ 28VDC, max. current: 150mA
    - GPS DR (Speed, direction, GND)
    - CAN2 2.0B (Default) & (BOM optonal for OBD II (ISO 15765-4 & J1939))
    - iButton
    1 x Mic-in 1 x Line-out 3 x Antenna on I/O
    - Rear: 1 x GPS, 1 x WWAN
    - Bottom: 1 x GPS, 2 x WWAN
    2 x Antenna on housing for Wi-Fi
    Mechanical Cooling System: Fanless Enclosure: Plastic PC/ABS + Metal heat-sink Mounting: VESA 75/100 & Desktop mounting Ingress Protection: Front panel IP54 Dimension: 212.9mm (W) x 144.97mm (H) x 40mm (D)(8.4" x 5.7" x 1.6") Weight: 1.3kg
    Power Management 9V~36V DC input Selectable boot-up & shut-down voltage Ignition: 8-level delay time on/off Reverse protection/over-voltage protection/low-voltage protection Wake up by SMS/RTC/ignition
    Operating System Linux YOCTO 2.0 by Request Android 5.1
    Environment Operating temperatures: Ambient with air -20°C to 70°C Storage temperatures: -30°C to 80°C Relative humidity: 10% to 90% (non-condensing) Vibration
    Vibration test: IEC 60068-2-64, 2.5G
    Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
    Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24
    Shock
    MIL-STD-810G, 516.6 Procedure 1, trucks and semi-trailers=40g
    Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g
    Certification CE/FCC class B/E-Mark
    加入查詢
    Take a minute and tell us what you think!
    欧美肥妇多毛BBW,高清白胖肥妇BBWBBW,荷兰肥妇BBWBBWBBW